Trend IMC-101 Manual do Utilizador

1IMC-101 Installation Instructions TG200840 Issue 1/A 10/12/04Installation InstructionsIMC-1011TX to 1MMFX Ethernet ConverterTrend supply the followin

— 6 —Safety First! Be sure to disconnect the power cord before installing and/or wiring your MOXA Industrial Media Converter. Safety First! Calculate

— 7 —FAULT: The two middle contacts of the 6-contact terminal block connector are used to detect both power faults and port faults. The two wires atta

— 8 —Communication ConnectionsIMC-101 models have one 10/100BaseT(X) Ethernet port, and one 100BaseFX (SC or ST type connector) fiber port. 10/100Base

— 9 —SC-Port Pinouts SC-Port to SC-Port Cable Wiring ST-Port Pinouts ST-Port to ST-Port Cable Wiring This is Class 1 Laser/LED product.

— 10 —Dip Switch Setting IMC-101 series DIP switchDip Switch 1 (Default: Off ) ON: Enables the PORT Alarm. If the port’s link fails, the relay will fo

— 11 —Off 100BaseTX Port’s link is inactive OnFX port’s 100 Mbps is active BlinkingData is being transmitted at 100 Mbps 100M (FX)GREEN Off 100BaseF

— 12 —SpecificationsTechnology Standards IEEE802.3, 802.3u, Link Fault Pass-Through Interface RJ45 ports 10/100BaseT(X) Fiber ports 100BaseFX (SC,

— 13 —EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-2 (CS), level 3 Shock IEC 60068-2-27 Free Fall IEC 60068-2-32 Vibration IEC 6

— 14 —MOXA Internet Services Customer satisfaction is our number one concern, and to ensure that customers receive the full benefit of our products, M

— 15 —Revision History Document Edition Revision Date Revision Details 2nd June 15, 2004 1. Updated the edition of this manual on the title page.

IMC-101 Installation Instructions2IMC-101 Installation Instructions TG200840 Issue 1/A 10/12/04Trend Control Systems Ltd reserves the right to revise

MOXA Industrial Media ConverterIMC-101 Hardware Installation Guide Third Edition, July 2004

— 1 —Overview MOXA Industrial Media Converter, which is specially designed for a reliable and stable operation in harsh industrial environments, provi

— 2 —Panel Layout of IMC-101 series1. Grounding screw2. Terminal block for power inputPWR1/PWR2 and relay output3. Heat dissipation orifices4. Dip s

— 3 —DIN-Rail Mounting The aluminum DIN-Rail attachment plate should be fixed to the back panel of IMC when you take it out of the box. If you need to

STEP 1:Insert the top of the DIN-Rail into theslot just below the stiff metal spring.STEP 2:The DIN-Rail attachment unit willsnap into place as shown

— 5 —Wiring Requirements Warning Do not disconnect modules or wires unless power has been switched off or the area is known to be non hazardous. The d